Polystyrene details
Polystyrene HIPS izod>1.5 details
Property | Description |
|---|---|
V300/20 | 20% Glass fiber reinforced |
V350/10 | 10% Glass fiber reinforced |
Polystyrene HIPS izod>1.5 Test results
Property | Test Method | V300/20 | V300/10 |
|---|---|---|---|
Description | 20% Glass fiber reinforced | 10% Glass fiber reinforced | |
Processing Method | Injection | Injection | |
Specific gravity, g/cc | ASTM D792 | 1.20 | 1.13 |
Linear mold shrinkage, in/in(m) | ASTM D955 | .002(.002) | .003(.003) |
Hardness, Rock well | ASTM D785 | R115 | R110 |
Reinforcement content % | ASTM D2584 | 20 | 10 |
Notched izod impact, ft-lb/in(J/m) | ASTM D256 | 1.2 (64.1) | 1.5 (80.1) |
Tensile strength | ASTM D638 | 6,500 (44.8) | 5,500 (37.9) |
Elongation, Ultimate % | ASTM D638 | 2 | 3 |
Flexural modulus psi (MPa) | ASTM D790 | 650,000 (4483) | 450,000 (3103) |
Heat detection temp, @66 psi °F(°C) @264 psi °F(°C) | ASTM D648 | 210(99) 190(88) | 205(96) 190(88) |
Special Features | High stiffness | High impact |
Polystyrene MIPS izod>=1.0&<=1.5 details
Property | Description |
|---|---|
V300/30 | 30% Glass fiber reinforced |
V350/20 | 20% Glass fiber reinforced |
Polystyrene MIPS izod>=1.0&<=1.5 details test results
Property | Test Method | V300/30 | V350/20 |
|---|---|---|---|
Description | 30% Glass fiber reinforced | 20% Glass fiber reinforced | |
Processing Method | Injection | Injection | |
Specific gravity, g/cc | ASTM D792 | 1.30 | 1.20 |
Linear mold shrinkage, in/in(m) | ASTM D955 | .002(.002) | .002(.002) |
Hardness, Rock well | ASTM D785 | R115 | R110 |
Reinforcement content % | ASTM D2584 | 30 | 20 |
Notched izod impact, ft-lb/in(J/m) | ASTM D256 | 1.0 (53.4) | 1.5 (80.1) |
Tensile strength | ASTM D638 | 7,000 (48.3) | 6,200 (42.8) |
Elongation, Ultimate % | ASTM D638 | 2 | 3 |
Flexural modulus psi (MPa) | ASTM D790 | 920,000 (6345) | 600,000 (4138) |
Heat detection temp, @66 psi °F(°C) @264 psi °F(°C) | ASTM D648 | 215(102) 195(91) | 205(96) 190(88) |
Special Features | High stiffness | High impact |